5.8GHz 25mW FPV 40CH raceband video transmitter

This 25mW transmitter can transmit on 40 channels, including the new raceband, and has a microphone on-board and 5V output for powering your FPV camera.

More details

$18.99

TX-5800-25-mini

+ -

Availability: In Stock

Accessories

 
More info
This 25mW transmitter can transmit on 40 channels, including the new raceband, and has a microphone on-board and 5V output for powering your FPV camera.
 
The race band is a special frequency band with improved channel spacing.  This wider channel spacing allows you to run multiple 25mW transmitters at the same time in proximity with each other. Perfect for racing with your buddies.
 It is very easy to see and change the band and channel using the push button and LED.
 
The  input voltage from 5.0V-20V. 
You can power the transmitter directly from your 2S-4S Lipo pack. If using over 20V(>4S), be sure to use D24V10F12 voltage regulator to avoid damage to the transmitter.
When the transmitter is powered from 7.0V and higher, it can provide 400mA @5V to power your camera. You can use this to charge a Gopro in-flight, or to power your micro CCD/CMOS camera.
 There is a small solder jumper which you can remove to bypass the 5V regulator and feed the input voltage directly to your camera. This is useful if you are powering the transmitter with 12V and are using a 12V camera, too . 
 
No heatsink is needed, the transmitter is barely warm.
 
A built in microphone  is  tuned for hearing your motor RPM’s in flight. It works very well with the Headplay Goggles, which have a built in speaker.
 
This latest generation transmitter can powered ON without an antenna connected, and will not be damaged by doing so. 
 For example,if you break your antenna in a crash- you will not burn out this video transmitter. 
 
The video and power connector is locking, to prevent it from accidentally coming loose.

  • 40 channels
  • SMA Antenna connector
  • Dimensions: 31*22*10mm (not including SMA adapter)
  • Voltage Input- 7-20V

5-PIN connector:

Line 1: DC-IN (7-20V)    

Line 2: GND   

Line 3: VIDEO_IN    

Line 4: GND        

Line 5: 5V_OUT

Change frequency band and channel

Single push to change CH, push and hold for 2 seconds to change band.

Below is the channel table for your reference: 

      CH

FR

CH

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

FR1/Band A

5865

5845

5825

5805

5785

5765

5745

5725

FR2/Band B

5733

5752

5771

5790

5809

5828

5847

5866

FR3/Band E

5705

5685

5665

5645

5885

5905

5925

5945

FR4/Band F

5740

5760

5780

5800

5820

5840

5860

5880

FR5/Band R

5658

5695

5732

5769

5806

5843

5880

5917

  • Product Name:5.8GHz 25mW FPV 40CH raceband video transmitter
  • Product Reference: TX-5800-25-mini
  • By RangeVideo
  • Price: $ 18.99
  • Product Width: 0.00 in
  • Product Height: 0.00 in
  • Product Depth: 0.00 in
  • Product Weight: 0.00 lb
  • Description: This 25mW transmitter can transmit on 40 channels, including the new raceband, and has a microphone on-board and 5V output for powering your FPV camera.
Path: > > > 5.8GHz 25mW FPV 40CH raceband video transmitter

10 other products in the same category

Customers who bought this product also bought

 
5.8GHz 25mW FPV 40CH raceband video transmitter
 
   4.7 3                     
             
Continue shopping Compare

has been added to your wishlist.

Continue shopping My wishlists