It's on the way! :)
Type: Posts; User: ElliotHC
It's on the way! :)
So the RVOSD5 has two battery inputs....
It has a 5v switch mode power supply on the board....
Am I totally missing a trick here??
Stick a bigger inductor and higher rated regulator and you've...
:eek: No comment!
There seems to be this annoying red disc with some white writing where the little add button should be. It doesn't matter how many times I click refresh, it's still there!
I think that RV needs a...
OMFG! You are right... I need to have two lots of servos :D
Seriously though, I've had UBECs fail with one of the main caps going short circuit but I can't remember a servo ever failing under...
Maybe I need to run 2 x UBEC's with Diodes with one UBEC connected to the main battery and the other to a spare battery, they'll use the higher voltage source and have full redundancy.
I did mean U-BEC, what if that packs up...
I have aux battery for RVOSD (great) but there is no redundency for the servos and without them there is no gliding home.
Thanks Alex..
So basically, if my BEC fails then I have no servos?
Has anyone linked the 5v camera/TX rail tothe servo rail to power a couple of servos and a receiver? I have no BEC on this plane and see no point in adding one when I'm running a 12v DC-to-DC...
I think that the majority of customers are spread across the world so taking the time zones in to account, the traffic should be quite spread out.
Also, I don't think that there are thousands of...
Vova
I have very reliable information that the RVGS will most probably be available around or before 19th of this month.
It does say Feb but then again, those of us who have previously waited 10 months for stuff know that sometimes it's not quite on time :)
However, that being said.. I expect that it will take me a...
The anticipation is just too much...
One vote for a webcam in RV's production area :)
I think my refresh button is wearing out!
I'm getting together all the parts for a new FPV plane, I will use the new RVJET as the platform with all the usual refinements...
I am just about to buy some batteries and I need to know what the...
Any chance the the RVJET and the RVGS will be in stock at the same time? I want to buy both and RVOSD5 and combine shipping!
I've waited almost a year once before :D
Well, I suppose it's true.
All you really need is oxygen, food and water.
However, the RVGS is paramount to my mental health! :)
You need it if you are flying long range using a PC and monitor out of one fixed location and are using HK's Ground Station for waypoint navigation etc..
Can we get an update?
Are you doing new boards, have they been done, are they being made, are you still deciding what to do, are you looking for components that fit etc...???
It would be nice...
Hopefully this is the case. With Ardupilot, I just set the tracker position on the map and key in the altitude. I understand that this isn't quite so easy in this case but I didn't want to go...
It was more the offset issue, even if I stand on the roof (which would be awkward for every flight) holding the aircraft above my head, the tracking head is still a good 3m higher.
What would be...
Hi, the main problem is that I can't see how the tracking head can point at the plane when it's low down and the antenna is up high... How does it know it's 9m up???
I've been using...
Do you set the position of the tracking antenna with the RVGS and it is fixed? e.g. you set the altitude and lat/lon?