Search:

HI GUYS,
i have a little question for you.... but if i remove the copilot sensors, and i try to connect this very cheap and working system between my receiver and rvosd, in case of loss of signal or...

Ok Alex... Don't worry... Take your time!!

yes alex...i can do some tests if u...open my mind:))

i'm waiting for all your istructions,

emfinite3131 tnx for your help...i have tried, but the problem remain exactly the same!

tried.....nothing...
or...if you can explain exactly in witch mode i have to do this will be better alex!

yes...all externally with no osd is working well alex....i have read all the posts in the forum...i think....
anyway another YES... when i switch on the rvosd the two leds working normally....all...

yesterday i was in flight with the osd gen2 on my easystar...all work perfect...
after 5 minutes of flight in fpv style and at 1,2km from my position the video goes black in a second(fortunately i...

cut it!
i live in italy and use futaba connector for video black and red.... for the audio usually you have to connect directly the mic!

ok alex i have read all the attachments on my tread....i have triyed all, the powes tested on video in and video out is 11.25v (i think is good to energyze the camera and transmitter right?
i...

ok alex stay tuned...i try...

no alex i have to solve the prblem, becouse if i bypass the osd i can't see the consuption of the other battery....
but you mean i have to change again the l1?

ok i have soldered the inductor, the cam and the osd are alive! again !!!!

but, after 2 flights the video signal goes now and then, i think the problem is of the small white connector of the...

ok, i run immediately to the near pahrmacy and take some sedatives for other 7 days......ehehehe
tnx vova!

ok vova, tnx for your fast replay....
last question....whennn we can download the version 3?

sorry guis but just to know.....
in the version 3 of rvosd is possible use the v tail and flaperons?
and....when i can download the new firmwareeee

but what u mean for receiver??
witch model is?
on my easystar i have 2500 3s for esc and r/c
and another 3s 1200 for camera and transmitter
with this setup i can fly for 35 minutes and almost 45...

Tnx a lot vova!

tnx guys for the fast response....tomorrow i try to found it in my storage...
another question.....the problem is born because i was lost my cam cable some days ago....
no the question is.....may i...

guys is possible know the colors of the pin in sequence to built a new cable of my dx201?
i need to know where sold the 4 wires to the pin to insert it in the osd...
if you have some photos will be...

i think the reason of smoke is the wrong wire connected from the dx201 to the osd...

GUYS I HAVE A BIG PROBLEM with my rvosd...... i have tried to insert the cable of my dx201 and in une second the osd go in smoke....i disconnect the battery immediately and i found 1 component...

is good..i have it....but the resolution of recording is not the best!

chilo ti ho appena aggiunto.... vieni su skype che ti carico di meraviglia!

ok kchilo...scusami per la lunga sparizione.....
sono tornato per una nuova domandina....
sec te riusciamo ad implkementare qualcosa per far si che il pvosd operi una navigazione su wp???
ci sono...

quindi fammi capire...in caso cambiassi l'aggeggino alex dovrebbe cambiarmi qualcosa nel firmware??

ovvio...te calcola che per non rischiare ilmodello oggi ho montato tutto su un aggeggio di legno e ci andavo in giro a piedi...così almeno riesco a capire le basi e non rompo una mazza!
senti ma se...