Search:

Works fine on my ipad

That is normal. Check the manual for adjustments. It can be changed

You must supply power to the servo rail, as noted in the manual.

Hi Kriss,
If you hit something at that altitude, somehow it would be Alex's fault and then Vova would be blamed for taking more than a few hours to make the repairs...
Cheers,
Bill

There are several limitations on the GPS, but from the "designers". There is an altitude limit, like 60,000 feet and speed is 1,000 knots. See: http://www.insidegnss.com/node/3035

Most of us max...

Thanks, Frank.
I did not realize that upgrade had been added. Sounds great.
I was in Toronto last December and didn't have time for flying or much else.
Cheers,
Bill

What exactly do you mean with RTL? When r/c is lost, the OSD will either enter failsafe or return to home (RTH) depending on how it is setup. However, one can easily toggle through the various...

You would have to sweet talk Alex to get that functionality... I would love to have a rotary dial that would envoke a certain mode based on posistion. 1:00 = FBW, 2:00= HH, etc. however, Alex has...

Read section 4.19.3. "If r/c link is lost". Also, to remove all doubt, aux in gets you into the menu system, you navigate with the sticks on your transmitter. By the way, if you hook up aux-in to a...

Hi Michael,
You are correct, you did miss something... Assuming you have video connected through the OSD, you can change modes, settings, etc. if you watch the videos posted on this forums, most...

Hi Frank,
I don't want to impose on your vacation. I am actually over in Houston these days, about 150 miles east of Austin/ Round Rock. I was making a joke about the weather when I read you were...

Frank,
Are you in Austin now? The weather is like this all year round...
Bill

Hi Adrian,
Not a criticism of your skills. As several people pointed out, many things went wrong. Personally, having the plane fully loaded on the second flight (possibly the first) may have been...

How about if it just hovered where it was or at a minimum, a few feet off the ground...

Seriously, looked like pilot was in contact, but not in control. But why would anyone enter the menu while...

Nice one Frank,
Looks very stable, I hope this one has a long and fruitful life.
Cheers,
Bill

Frank is saying the OSD does not use the 5v rail to power the OSD. The OSD gets its power from the main battery or if a jumper is set correctly, from the aux battery. The OSD has a wide voltage...

Get your multimeter out and see where the power stops. Starting where Alex suggested on the current sensor.
Also post a hi-res picture (with good lighting) of the front and back of the OSD and...

Frank,
This still won't detect those fence post induced stalls you made famous...
Cheers!

Alex, I didn't know you were from the states.

Couldn't resist... Not to make lite of your ordeal, congratulations on getting away from the communists.
Cheers,
Bill

Those paper cuts can be nasty...

Hi Frank,
Congratulations on yet another white knuckler. I am beginning to think you enjoy those...
Cheers,
Bill

Bummer Kevin!!! Turning fifty already has its affect.
Hopefully it will turn up. Alaska is filled with good folks.
Beat of luck
Bill

Hey Kevo, belated birthday wishes to you on the big 5-0.
Did you make it? Spending much time in the rocking chair?

The time is likely to come from the GPS, The receiver must then deal with the offset. I just spent two minutes scanning the manual, didn't see anything about correcting the offset. Maybe 5.07 will...

Read second post