Search:

well i have done 3 flights and only once it happen to me so ill do some more testing and then decide.
Thanks Alex anyway

i see that im not the only one with that problem...

Thanks guys, what wd i do without you ...;]

Whats the glide ratio for skywalker 168?

Cables betwen vtx, osd and camera are shielded with toroids.
Cant increase vtx distance due to cog.
I can move osd 5 cm down from under wing to belly... but if that the problem why on my second...

Any idea what to do?

it tells me how many kilometers i can fly with current speed and battery consumption. just your range

Alex where i should place Vtx / GPS ?

what do you mean ? how can i increase distance? cant move vtx back because of cog. i have been flying with that setup over year using other brands osd and never had any problems with gps..

its just under motor.

im nt sure about version, bought it this month when it was back in stock
components layout in pic

but why? osd was restarted after saving home...
what if it will fail far away from home ?

http://www.youtube.com/watch?v=OErF5D9qh0o

Whats home arrow showing?

Dont know bought it this month on first day that was back in stock

Ok ill do more tests. But why distance to home and altitude was right? Thats from gps as well?

Hi. Just made first flight with rvosd5. On the first flight i had some problems. Compass home arrow speed and los distance benn frezzing all the time, distance to home and altitude was ok. What...

asking because its hidden in foam due to vibrations and i dont want to overheat it

hi. whats the correct working temp for rvosd5 main board ? whats the limit ?

You should check it by yourself first. Maybe it was simple 5 minutes job:-)?

Well. Its back alive. Problem was bad solder on the bottom of the board where the signal pin is soldered! Tahnks for help, i saved me and RV time and money.
Alex ill have to get new heat shrink...

thats what i have done :]
Thanks

just question : do i have to check it with 12v applied or without? i think that it doesnt matter but i want to be sure.

ok. its too late today . ill do it tomorrow and let you know .

Thanks alot ! Great customer service !

well its 0ohm across but not connected to elevator signal

well if its just smd resistor or something similar not to complicated i can do it. but if its some kind of chip with 20 legs i will send it back