HeadPlay SE FPV Headset w/ 40ch 5.8 GHz Receiver , DVR, and RHO lens
Head Mounted Display 7" 5.8 GHz A mind blowing 72 degree field of view will immerse you in FPV. This is the newst version direct from the factory with latest 40 CH 5.8 GHz autoscan receiver, HMDVR, HPRO RHO lens.
The HeadPlay SE FPV Headset (U.S. Pat. No D741327 S1) is packed full of features that every FPV enthusiast will enjoy. This headset was designed from the ground up with the FPV pilot in mind, with quality, performance and comfort at the forefront. The headset gently rests on the forehead/cheeks spreading the weight out evenly, which compared to many video goggles which rest on the bridge of the nose instead. Three straps securely hold the HeadPlay HD in place while at the same time blocking light coming in from the outside. The end result is a cinematic experience that is sure to impress. This headset is a great choice for FPV pilots that struggle to find a traditional FPV goggle that meets their Interpupillary distance (IPD). Instead of each eye having to look through separate optics, the new HeadPlay HD presents the pilot with one large screen.
1 x DVR
1 x HPRO RHO lens
1 x F220 mm cinematic view lens
1 x XT60 power harness/DVR harness
2 x Face foam packs (different densities to allow comfort adjustment)
Micro SD caerd
Easily connect HD video sources like the DJI Inspire, LightBridge, Paralinx, Teradek or even a TV to the headset via the HDMI input. Alternatively you can connect any other A/V source via the A/V input. For example you can connect your ground station or other video receivers on 900MHz/1.3GHz/2.4GHz etc.
Integrated 5.8GHz receiver.
40 channel receiver designed by RangeVideo. Super sensitive and works with Boscam/ImmersionRC/Fatshark. All channels. Channel switch by push-button and LED segment display on top of goggles.
Connect the Headplay HD goggles directly to your DJI Inspire or DJI Lightbridge system. See in HD to make better aerial videos.
External AV input.
Connect your 900MHz/1.3GHz/2.4GHz external FPV audio video receivers to the Headplay HD. Bring new life to your old FPV setup. Try it with the super crisp and bright Headplay HD.
Field of View: 72 degree
Fully adjustable picture via intuitive menus
Control via button panel (distinct button design for "blind" operation)
Rugged design with extremely durable materials
Very high comfort
Different density foam pads allow you to adapt the goggles to your needs.
Weight: 400g (excluding battery)
Easy to clean optics
Current consumption 340mA@12V
Supply voltage: 6-20V Recommended 2S-3S LiPo
Reverse voltage protection
HDMI type C (HDMI-in)
XS9JK (latched high end connector): Power Supply, Video-in, Audio-in, Ground, 5V out
SMA antenna connector
40 channel 5.8GHz A/V receiver with channel autoscan.
Built-in speaker with volume control on buttons
8 segment display
Band 1: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band 2: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band 3: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band 4: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880
Band 5: 5658, 5695, 5732, 5769, 5806, 5843, 5880, 5917
Q: is the Headplay HD compatible with DJI Inspire and Connex HD?
A: Absolutely, the goggles are designed with these 2 products in mind! They can be directly connected via a HDMI cable. The picture quality is simply amazing!
Q: What material is used for the Headplay HD housing?
A: The goggles are made out automotive grade EPP which has been chosen for its superior strength (widely used in car bumpers) and for its low weight
Q: Can I wear glasses?
A: Yes, but it depends on the width of your glasses. But the goggles can be modified with a sharp knife to adapt the width to your particular needs.
Q: Is the Headplay HD 3D enabled
A: No, the goggle uses a single high resolution screen. But due to the unprecedented viewing angle, the immersive feeling almost like 3D.
Product Name:HeadPlay SE FPV Headset w/ 40ch 5.8 GHz Receiver , DVR, and RHO lens
Product Reference: HPSE-Green
Price: $ 239.00
Product Width: 0.00 in
Product Height: 0.00 in
Product Depth: 0.00 in
Product Weight: 0.00 lb
Description: Head Mounted Display 7" 5.8 GHz A mind blowing 72 degree field of view will immerse you in FPV. This is the newst version direct from the factory with latest 40 CH 5.8 GHz autoscan receiver, HMDVR, HPRO RHO lens.
Path: Home>Headplay > HeadPlay SE FPV Headset w/ 40ch 5.8 GHz Receiver , DVR, and RHO lens