Don't use 12V 3s LiPo with this Tx - it will burn it!
Use 7.4V 2s batteries.
Important notice to customers in the United States:
The transmitter requires Technical Class License to operate.
Transmitter is shipped to US addresses with fixed CH1 (2410MHz)
Don't use 12V 3s LiPo with this Tx - it will burn it!
Features:
- 5V operation
- 2400MHz frequency range
- 500mW RF output power
- 8 channel operation ( PLL)
- Detachable - swivel SMA antenna
Purchase includes :
- TX-2400-500
- Transmitter antenna
- RCA adapter cable
Specifications:
| Frequency Range |
CH1 2410 MHz
CH2 2430 MHz
CH3 2450 MHz
CH4 2470 MHz
CH5 2370 MHz
CH6 2390 MHz
CH7 2490 MHz
CH8 2510 MHz
|
| RF Output Power |
500 mW (milliwatts) |
| Channels |
8 |
| Dimensions, Weight |
28.3 x 24.0 x 6.7mm, 14g |
| Modulation Method |
FM |
| Signal Stability |
+/- 250 KHz phase-lock-loop (PLL) synthesized |
| Range |
|
| Antenna Input Plug |
female SMA plug |
| Input Voltage |
5 volts DC directly to transmitter
6-10 volts DC through included adapter cable |
| Power Consumption |
~330mA |
| Video Input Type |
Composite 1 Vp-p @ 75 ohms unbalanced |
| Video Input Plug |
RCA female |
| Power Input Plug |
2.1mm x 5.5mm center pin positive |
| Audio Transmission |
mono |
| Audio Sub-carrier |
|
| Audio Input Type |
line level |
| Audio Input Plug |
female RCA |
| Standard Antenna Dimensions |
117mm long x 9 mm diameter at widest point |
| Standard Antenna Weight |
8.9g
|
| Standard Antenna Polarization |
Vertical |
| Antenna Horizontal Beam Width |
360° |
| Standard Antenna Gain |
3dBi |
Common Applications:
FPV video transmitter.
Downlinking a digital camera from model helicopter/UAV.
General CCTV video and security purposes where installing hardwired connection is not
Installation:
It is very easy to implement this transmitter into your design. The transmitter has four connections:
Red: Power 5VDC
Black: Ground
Yellow: Video in
White: Audio in
The transmitter also includes an RCA adapter cable with inline switch mode buck voltage regulator.. This cable terminates with RCA female audio/video connectors, and a 2.1mm barrel power plug (center pin positive).
You can connect any composite video source to this transmitter. This includes but not limited to:
Digital camera video out
Video camera
Micro camera
As well as video, the transmitter accepts line level audio input.
Power:
A heatsink is fitted to displace heat..
The included voltage regulator is capable of a wide 6-10VDC voltage range.
If the included voltage regulator is not used, then an alternative regulated 5VDC power supply must be used.
The best power supply for permanent installation is an AC to DC wall convertor.
The best portable power source is our 2s 7.4V Li-Poly battery/charger/adapter combo.
